0.1M Sulfuric Acid MSDS
Identification
Product Name: 0.1M Sulfuric Acid
Synonyms: Sulfuric Acid Solution, Diluted Sulfuric Acid
Chemical Name: Sulfuric Acid
CAS No: 7664-93-9
Molecular Formula: H2SO4
Molecular Weight: 98.08 g/mol
Hazardous Ingredients
Sulfuric Acid (CAS No: 7664-93-9)
- Concentration: 0.1M (1%)
Physical and Chemical Properties
Physical State: Liquid
Appearance: Colorless, Odorless
pH: <1
Boiling Point: 338°C
Melting Point: 10°C
Solubility: Miscible with water
Hazardous Identification
Hazard Class: Corrosive
NFPA Rating:
- Health: 3
- Flammability: 0
- Reactivity: 2
HMIS Rating:
- Health: 3
- Flammability: 0
- Reactivity: 2
First Aid Measures
Skin Contact:
- Immediately flush skin with plenty of water for at least 15 minutes.
- Remove contaminated clothing and shoes.
- Get medical attention if irritation or burns occur.
Eye Contact:
- Immediately flush eyes with plenty of water for at least 15 minutes.
- Remove contact lenses, if present.
- Get medical attention if irritation or burns occur.
Ingestion:
- Do not induce vomiting.
- Give water to drink to help dilute the acid.
- Get medical attention immediately.
Inhalation:
- Remove to fresh air.
- Get medical attention if irritation or difficulty breathing occurs.
Fire-Fighting Measures
Extinguishing Media:
- Water spray
- Carbon dioxide
- Foam
Special Fire-Fighting Procedures:
- Wear protective clothing and self-contained breathing apparatus.
- Cool containers with water spray.
Handling and Storage
Handling Precautions:
- Wear protective clothing, including gloves, goggles, and a face shield.
- Handle in a well-ventilated area.
- Avoid inhalation and skin contact.
Storage Precautions:
- Store in a corrosion-resistant container with a tight-fitting lid.
- Keep away from heat, sparks, and open flames.
- Keep away from incompatible materials.
Exposure Controls/Personal Protection
Exposure Limits:
- OSHA PEL: 1 mg/m³
- ACGIH TLV: 1 mg/m³
Personal Protective Equipment:
- Wear protective clothing, including gloves, goggles, and a face shield.
- Wear acid-resistant boots and apron.
Stability and Reactivity
Stability:
- Stable under normal conditions.
Incompatibility:
- Incompatible with strong oxidizing agents, alkaline materials, and combustible materials.
Hazardous Decomposition:
- May release toxic fumes of sulfur dioxide and sulfuric acid mist.
Disposal
Dispose of in accordance with local, state, and federal regulations.
Transportation
DOT Shipping Name: Sulfuric Acid Solution
DOT Hazard Class: 8
UN Number: 1832
Packing Group: II
Regulatory Information
OSHA Hazard Communication Standard (29 CFR 1910.1200)
SARA Title III Section 313 Toxic Chemicals
Clean Air Act (CAA) Section 112(r)
Clean Water Act (CWA) Section 313
TSCA Section 8(b)
Revision Information
Revision Date: [Insert Date]
Revision Number: [Insert Number]
Note: This MSDS is not intended to be a warranty or guarantee of the product's safety, and it is not a substitute for safe handling practices and proper use of the product. The information contained in this MSDS is based on data available to us and is believed to be accurate as of the date of its preparation. However, no warranty, expressed or implied, is made regarding the accuracy or completeness of the data.
